Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
Footwear is constructed of materials that, when in contact with properly grounded floor surfaces, will safely discharge static build-up through the shoe to the floor. Our testing experience contributed to the SD standard established in Section 6 of the ANSI Z41 and carried over to the current ASTM standards.
Built with an outsole design and materials that help provide slip-resistance and traction on various surfaces.
ASTM F2413 protective toe classification
ASTM F2413 static-dissipative standard
Moisture-wicking mesh lining
MARK II ASTM F1677 tested slip-resistant outsole
Removable EVA cushion footbed insert with sponge rubber heel wedge
Rated 5 out of
Steve J from
Florisheim steeltoesBetter than expected these are the best looking and fitting steeltoes shoes i ever purchased in my 30 years of wearing florishiem. I always use to wear FS 200 but you had to order extra wide but not these. They finally got it right , just order your regular size.
The 3E would be wider than the D Width, I have listed below how all the letters translate into width for future reference:
The Letters you are asking about reflects the width of the shoe here is the order C (narrow), D (Medium), E (wide), EE (extra wide), and EEE (triple wide).