Baffin Spartacus Composite Toe Work Wellingtons are CSA, ASTM and CE approved for on-the-job safety.
Made with a composite toe, these men's 16-inch boots meet ASTM standards for protective toe, electrical hazard and puncture resistance. They also comply with CSA standards for resistance to electric shock, Grade 1 protective toe and puncture protection.
These light weight polyurethane boots resist oils and chemicals.
High-vis reflective strips provide an extra element of safety.
These insulated work boots are specifically designed for the north American climate and will remain cold crack resistant to -58 °F.
For work boots that keep you safe, get these Baffin boots.
Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
Footwear is built with nail-free construction to help insulate you from the ground to slow down conduction, but is not intended to be primary protection against electric shock. Leather footwear must be dry. Our electrical hazard boots meet and exceed ASTM electrical hazard standards.
Traditional insulation - typically felt or
polyfill material offers a thermal barrier
without the added benefits of premium
PR footwear reduces the possibility of sharp objects (nails, glass or metal) penetrating through the outsole causing injury to the foot. Protection is provided by a steel or puncture resistant material imbedded in the insole of the footwear.
This product is built with quality waterproofing materials to keep you dry in wet environments.
CSA Approved Soles that provide electric shock resistance
Soles that provide electric shock resistance. Such certified footwear contains a sole and heel design assembly that, at the point of manufacturing, has electrical insulating properties.
CSA Approved - Sole Puncture Protection with Grade 1 Protective Toe
Grade 1 protective toe will withstand up to 125 joules (50 lbs) dropped from 0.6 m. Sole puncture protection is designed to withstand a force of not less than 1200 Newtons (270 lbs) and resist cracking after being subjected to 1.5 million flexes.
Constructed using no metal material or parts. Perfect for working environments that require passing through metal detectors.
ASTM F2413 protective toe classification
ASTM F2413 electrical hazard standard
ASTM F2413 puncture resistant standards
CSA Green Triangle meets CSA standards for Grade 1 protective toe and has a protective plate between the outsole and midsole for puncture resistance
CSA Omega Rectangle meets CSA standards for electric shock resistance
Acid- and oil-resistant rubber outsole
Hi-vis reflective strips
GelFlex fatigue-resistant midsole
Specifically designed for the North American climate
16 Inches in height
Abrasion- and chemical-resistant polyurethane boot
Thermal PU compound is cold crack-resistant to -50°C/-58°F
bvseo-msg: Unsuccessful GET. status = 'SERVICE_UNAVAILABLE', msg = 'No callback was configured for service bazaarvoice.http'; Unsuccessful GET. status = 'SERVICE_UNAVAILABLE', msg = 'No callback was configured for service bazaarvoice.http';