Ariat Rambler Steel Toe Pull-On Work Boots are safety toe boots that meet ASTM standards.
Your feet are protected when you wear these men's work boots due to the wide square steel toe that meets ASTM protective toe standards for impact and compression. The boots also are compliant with ASTM standards for electrical hazard.
The pull-on work boots have a PVC outsole that helps give you grip on slippery surfaces and there's a 90-degree defined heel.
The 10-inch brown boots are made of full-grain leather.
Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
Footwear is built with nail-free construction to help insulate you from the ground to slow down conduction, but is not intended to be primary protection against electric shock. Leather footwear must be dry. Our electrical hazard boots meet and exceed ASTM electrical hazard standards.
Built with an outsole design and materials that help provide slip-resistance and traction on various surfaces.
Full-grain leather upper
ASTM F2413 protective toe classification
ASTM F2413 electrical hazard standard
Wide square toe
90-degree defined heel
10 Inches in height
Shaft height and circumference may vary by size
15.5-inch calf circumference
Weight: 5.1 pounds per pair for a size 10
Outsole meets or exceeds ASTM F1677-96 Mark II 0.50 CoF on wet and slippery surfaces
bvseo-msg: Unsuccessful GET. status = 'SERVICE_UNAVAILABLE', msg = 'No callback was configured for service bazaarvoice.http'; Unsuccessful GET. status = 'SERVICE_UNAVAILABLE', msg = 'No callback was configured for service bazaarvoice.http';