Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
Footwear is built with nail-free construction to help insulate you from the ground to slow down conduction, but is not intended to be primary protection against electric shock. Leather footwear must be dry. Our electrical hazard boots meet and exceed ASTM electrical hazard standards.
Traditional insulation - typically felt or
polyfill material offers a thermal barrier
without the added benefits of premium
PR footwear reduces the possibility of sharp objects (nails, glass or metal) penetrating through the outsole causing injury to the foot. Protection is provided by a steel or puncture resistant material imbedded in the insole of the footwear.
This product is built with quality waterproofing materials to keep you dry in wet environments.
CSA Approved Soles that provide electric shock resistance
Soles that provide electric shock resistance. Such certified footwear contains a sole and heel design assembly that, at the point of manufacturing, has electrical insulating properties.
CSA Approved - Sole Puncture Protection with Grade 1 Protective Toe
Grade 1 protective toe will withstand up to 125 joules (50 lbs) dropped from 0.6 m. Sole puncture protection is designed to withstand a force of not less than 1200 Newtons (270 lbs) and resist cracking after being subjected to 1.5 million flexes.
200 grams of 3M™ Thinsulate™ Insulation
Rubber toe guard
Oil-, heat-, and slip-resistant rubber outsole
Full-grain leather upper
ASTM F2413 protective toe classification
ASTM F2413 electrical hazard standard
ASTM F2413 puncture resistant standards
CSA Green Triangle meets CSA standards for Grade 1 protective toe and has a protective plate between the outsole and midsole for puncture resistance
CSA Omega Rectangle meets CSA standards for electric shock resistance
These waterproof insulated steel toe boots meet ASTM F2413 PT Class 75 protective toe standards.
This is a CSA Grade 1 boot. You will appreciate the puncture-resistant steel plate and 200 grams of 3M™ Thinsulate™ Insulation. Combined with a rubber toe protector and rubber outsole, these 8 inch safety boots give you the protection you need in boots that feel good on your feet.
The insulating bottoms of these boots provide electrical hazard protection and meet electrical hazard standards, ideal for dealing with open circuits under dry conditions. These boots also meet the ASTM F2413 puncture resistant standards.
You will appreciate the outstanding and comprehensive protection these boots provide. Try the Justin Original Workboots Rugged Utah Worker II Composite Toe CSA-Approved Waterproof 200G Insulated Work Boot today.