Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
PR footwear reduces the possibility of sharp objects (nails, glass or metal) penetrating through the outsole causing injury to the foot. Protection is provided by a steel or puncture resistant material imbedded in the insole of the footwear.
CSA Approved - Sole Puncture Protection with Grade 1 Protective Toe
Grade 1 protective toe will withstand up to 125 joules (50 lbs) dropped from 0.6 m. Sole puncture protection is designed to withstand a force of not less than 1200 Newtons (270 lbs) and resist cracking after being subjected to 1.5 million flexes.
Full-grain leather upper
ASTM F2413 protective toe classification
Padded ankle section
ASTM F2413 puncture resistant standards
CSA Green Triangle meets CSA standards for Grade 1 protective toe and has a protective plate between the outsole and midsole for puncture resistance
10 Inches in height
Electrical resistance between 0 and 10 000 ohms
Chevron vulcanized oil- and slip-resistant rubber outsole