Royer Utech® Steel Toe CSA Approved Puncture-Resistant Work Boot, , large
  • Royer Utech® Steel Toe CSA Approved Puncture-Resistant Work Boot, , small
  • Royer Utech® Steel Toe CSA Approved Puncture-Resistant Work Boot, , small

Product Warranty | Returns & Exchanges

Additional Information

This blue and black work boot has a unique look and great safety features. It's the Royer Utech® Steel Toe CSA-Approved Puncture-Resistant Work Boot.

The safety toe boot meets the ASTM standard for protective toe, resisting up to 75 pounds of impact or compression. It also meets the CSA standard.

This metatarsal boot is puncture-resistant and electrical hazard-resistant. It meets both the ASTM and CSA requirements for these features, too.

The 10-inch black and blue work boot is made of UTECH leather and Neoprene. It's assembled with heat-sealed seams. Thanks to the UTECH leather, this men's boot resists a variety of harsh elements that could otherwise ruin your footwear and your workday. This boot resists acids, bases, hydrocarbons, detergents and other chemicals.

The rubber outsole resists oils and slips. It has a rubber toe guard to resist abrasions. Inside the steel toe boot is a removable EVA insole.

If you need a men's work boot that withstands tough conditions, you just found it. Get this Royer boot.

    Protective Toe
    Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
    Electrical Hazard
    Footwear is built with nail-free construction to help insulate you from the ground to slow down conduction, but is not intended to be primary protection against electric shock. Leather footwear must be dry. Our electrical hazard boots meet and exceed ASTM electrical hazard standards.
    Puncture Resistant
    PR footwear reduces the possibility of sharp objects (nails, glass or metal) penetrating through the outsole causing injury to the foot. Protection is provided by a steel or puncture resistant material imbedded in the insole of the footwear.
    CSA Approved Soles that provide electric shock resistance
    Soles that provide electric shock resistance. Such certified footwear contains a sole and heel design assembly that, at the point of manufacturing, has electrical insulating properties.
    CSA Approved - Sole Puncture Protection with Grade 1 Protective Toe
    Grade 1 protective toe will withstand up to 125 joules (50 lbs) dropped from 0.6 m. Sole puncture protection is designed to withstand a force of not less than 1200 Newtons (270 lbs) and resist cracking after being subjected to 1.5 million flexes.
    • Rubber toe guard
    • ASTM F2413 protective toe classification
    • ASTM F2413 electrical hazard standard
    • Removable EVA insole
    • Oil- and slip-resistant rubber outsole
    • ASTM F2413 puncture resistant standards
    • Heat-sealed seams
    • CSA Green Triangle meets CSA standards for Grade 1 protective toe and has a protective plate between the outsole and midsole for puncture resistance
    • CSA Omega Rectangle meets CSA standards for electric shock resistance
    • 10 Inches in height
    • Weight: 5.0 pounds per pair for a size 10
    • Neoprene and UTECH® leather upper
    • Resistant to acids, bases, hydrocarbons, detergents and other chemicals