In need of some protective work boots with puncture resistance, but want the convenience of a pull-on? Then the men's MICHELIN® Men's HydroEdge puncture resistant alloy toe waterproof chelsea work boot is for you. These 6-inch chelsea-style pull-on work boots have an alloy toe and puncture-resisting plate that both meet ASTM F2413 standards for protective toe footwear.
A 6-inch full-grain brown and black leather upper has stretch gore panels that give to allow foot placement. The interior is lined with a soft mesh material and a waterproof membrane. A removable Orthoframe orthotic insole which is designed for ultimate air circulation and maximum cushioning. An EVA midsole with open air channels absorbs impact with each step. Finally, the dual-density abrasion and oil-resistant rubber outsole features O2F vent technology that forces air through vents to circulate air and provide good ventilation around the foot. This waterproof puncture resistant chelsea additionally meets ASTM F2413 electrical hazard classification. Get your pair today.
Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
Footwear is built with nail-free construction to help insulate you from the ground to slow down conduction, but is not intended to be primary protection against electric shock. Leather footwear must be dry. Our electrical hazard boots meet and exceed ASTM electrical hazard standards.
PR footwear reduces the possibility of sharp objects (nails, glass or metal) penetrating through the outsole causing injury to the foot. Protection is provided by a steel or puncture resistant material imbedded in the insole of the footwear.
This product is built with quality waterproofing materials to keep you dry in wet environments.
Constructed of lightweight metal, these toe caps are 30%-50% lighter than steel toe and typically have a wider toe box due to being made a little thinner.
An Advanced non-marking Michelin HydroEdge outsole that is oil and slip-resistant
Full-grain leather upper
ASTM F2413 protective toe classification
ASTM F2413 electrical hazard standard
Alloy safety toe for lightweight protection
ASTM F2413 puncture resistant standards
6 Inches in height
High performance mesh lining
Weight: 3.0 pounds per pair for a size 10
Twin gore panels for great fit
Nylon Pull Loops
Puncture Resisting Plate
Removable Orthoframe orthotic insole with memory foam
bvseo-msg: Unsuccessful GET. status = 'SERVICE_UNAVAILABLE', msg = 'No callback was configured for service bazaarvoice.http'; Unsuccessful GET. status = 'SERVICE_UNAVAILABLE', msg = 'No callback was configured for service bazaarvoice.http';